RJM Mini Amp Gizmo Instrukcja Użytkownika

MAC-2 User’s Manual RJM Music Technology, Inc.

Programming Programming the MAC-2 lets it know which switches to turn on when you select a program number on your MIDI footswitch. For each program n

1. Plug a ¼” cable into Switch 1 on the MAC-2 and the jack for your channel switching on your amp. 2. Make sure your MAC-2 is connected to your MID

your footswitch to control your amp’s boost function. Pressing that button will allow you to turn the boost on or off regardless of the current MIDI

Setup Mode Setup mode allows you to change how the MAC-2’s MIDI and switching functions work. In most circumstances, you won’t need these functions a

MIDI channel, press the Write button. The MAC-2 will flash its LEDs, then return to normal operating mode with the new settings whethes eC-2’s powe

Now, press the buttons to select the function or functions that require momentary switching. Make sure that only the momentary functions are lit up a

Data Backup To make sure your settings are never lost, you can copy your settings from one MAC-2 to another, or copy them from a MAC-2 to a computer.

To copy your settings from the computer back to your MAC-2, connect the MAC-2’s MIDI In jack to the computer’s MIDI output. Make sure the MAC-2 is on

Specifications 12Dimensions Half-rack size 8 (W) x 1.5 (H) x 5.7 (D) inches 20.3 (W) x 3.8 (H) x 14.5 (D) cm Weight 2 lbs 0.9 kg Power 9-

Warranty RJM Music Technology, Inc. warrants this product against any defects that are due to faulty material or workmanship for a period of one year

MAC-2 User’s Manual Version 1.0 August 6, 2007 Diamond Amplification 5261 Langfield Road Houston, TX 77040 +1-713-934-0100 Email: techsupport@d

Copyright © 2007 RJM Music Technology, Inc. All Rights Reserved.

2589 10 11 11 11Table of Contents INTRODUCTION 1 FRONT PANEL BACK PANEL 3 PROGRAMMING Continuous Controllers 6 SETUP MODE Setting MIDI Channel

Introduction Thank you for purchasing a MAC-2. This product is designed to add MIDI capability to your guitar amplifier. With a MAC-2, you can use a

Front Panel Function buttons 1 through 5 – These buttons control the five switches found on the MAC-2. Once the MAC-2 is connected to an amplifier

Back Panel SW1, SW2, SW3 – These jacks are for switches 1, 2 and 3, controlled by Function buttons 1, 2 and 3 on the front panel. When a Function

your MIDI controller needs more than 800mA, an adapter with a higher current capacity is required. Power – This unit requires power supply in the ra